Color steel machine has many advantages. After purchasing the equipment, many users will ask why my equipment has a longer service life than that of others. Is it the problem of equipment quality? In fact, Shanghai color steel equipment is not all. In the process of using the color steel machine, please pay attention to the operation process of the color steel machine to see whether it is the same as and different from the previous operation. If so, it is necessary for the production line of composite board equipment to find out the causes and solve the problems in time. We need to regularly check whether all parts of the color steel machine are stable, and clean all parts, especially the oil tank and oil filtering equipment, to keep the oil pipe smooth.
The color steel machine should not only be able to use, but also be maintained. The correct maintenance method can prolong the service life of the color steel machine. When using the color steel machine, we should pay attention to the following points: in the process of transportation, the arrangement of operation procedures is unreasonable, the construction conditions of stainless steel sandwich panel machine are poor, the road is uneven and dusty. Temperature also has a great impact on the service life of color steel machine. If the temperature is too low, fuel evaporation will be affected and the heat loss will be great. The maintenance was not timely, and the filter element was not replaced or even removed in time. Do not follow the operating procedures, do not use the color steel machine in accordance with the regulations, and the sandwich board machine continues to overload, seriously damaging the machine. The high viscosity of lubricating oil reduces the working capacity of the battery, makes it difficult for the engine to start, intensifies the wear of parts, thins the lubricating oil, reduces the oil pressure, makes the oil deteriorate, and will aggravate the wear of parts.
Fatigue failure of chain plate of color steel machine: under the action of repeated relaxation lateral tension and tight lateral tension, the chain plate will be fatigue damaged after cycles. Under normal lubrication conditions, the fatigue strength of the foam rock wool integrated machine chain plate is the main factor limiting the capacity of the chain drive bearing. Impact fatigue damage of color steel machine bushing: the meshing impact of Shanghai color steel mechanical chain transmission is first borne by the roller and sleeve. Under repeated impact, the roller / sleeve may suffer impact fatigue damage after the number of cycles. Bonding of pin and sleeve of color steel machine: if the lubrication is improper or the speed is too high, the working surface of pin and sleeve of rock wool board machine will be bonded. Bonding limits the speed of the chain drive. The above problems should be found and solved in time according to the actual situation. Otherwise, the color steel composite plate production line will have a great impact on the service life of the color steel machine. Because the failure will aggravate the continuous loss of machinery. The above reasons are why the service life of your color steel machine is not as long as others.